Laminam Bianco

The textural effect that characterises the Oxide Bianco collection is that of metal oxidation, with a colour palette of glacial tones and light shades tending towards light grey. Available with a Natural surface finish, Oxide Bianco reproduces the beauty of ceramics and the metal effect in large 1000×3000 mm slabs, which are particularly suitable for design applications that seek visual continuity and a modern look for the places they furnish.
Laminam 3/3+ and Laminam 5 reduced thicknesses broaden the range of applications: the key word is “ductility”, from the exterior cladding of large surfaces to interior furnishing, the Oxide Bianco ceramic slab is a highly impacting total-look solution.
The R9 anti-slip coefficient completes the proposal and further expands the design possibilities, making Oxide Bianco also ideal for flooring and cladding applications in residential and commercial interiors and exteriors that are particularly exposed to water.
Slabs from the Oxide Bianco collection can also be treated with the Ambience bioactive treatment, the latest generation of Laminam technology based on titanium dioxide, which transforms pollutants (VOC, NOx, SOx) present in the air and water into harmless elements.

A sophisticated blend of natural minerals which produces a worktop of ultimate performance.

Joints
Worktop joints are finished with a small ariss to the top edge. Silicone sealant is applied to prevent water ingression.

Heavily Veined / Particulated Colours
These colours are highly unlikely to have continuous flow of the pattern when 2 sheets or 2 pieces of the same sheet are seamed together. The change of pattern will show up on the seam area

Thermal expansion
Due to thermal expansion Diore Porcelain can expand up to 1mm per metre.

Overhangs and supports
Any overhang extending more than 300mm must be supported.

Upstands
Upstands less than 100mm high are extremely fragile and are not recommended.
Upstands are not normally cut from the same slab as the work surfaces and therefore an exact colour match is not possible.

Your new Porcelain worktops will need care and maintenance to keep them in good order over the years.

If you choose a polished finish they will be more easy to wipe down when compared to natural finishes which hold dirt more due to the surface texture.

This means Natural Finishes take a little longer to clean than Polished but if you use cleaning information in our Cleaning and Maintenance for Ultra Compact Surfaces Guide (link below) you will be able to remove the most stubborn stains.

However Natural Finishes are more resilient to scratching than polished if objects are dragged across the worktops (which should be avoided).

The best advice is to wipe up spillages when they happen and dry the worktop off with a tea towel,

Cleaning and Maintenance for Ultra Compact Surfaces.pdf

Scratches
Porcelains are highly scratch resistant but not scratch proof.

Staining
Porcelain worktops are incredibly hard and non-porous and will not absorb liquids, but it is still possible that grease, wine, coffee, nicotine, fruit juices and other strongly coloured substances can stain the surface if not properly protected or if the spills are not cleaned up immediately.

Hygienic
Polished Porcelain worktops are naturally hygienic as they are non-porous

Handling
For installation of worktops weighing above 120kg, you will need to supply additional labour at no cost to Bluestone, every additional 75kg requires an extra person to assist with lifting.

Key Features

UV Resistant

Laminam Bianco is highly resistant to ultra violet (UV) light and will not fade or degrade over time making it perfect for both indoor and outdoor applications

Durability-Icon

Durable

Porcelain is renowned for its outstanding durability, engineered to withstand the demands of both residential and commercial environments.

Heat Resistant Icon

Heat Resistant

Laminam Bianco offers exceptional heat resistance. The surface can comfortably withstand direct contact with hot pots, pans, and kitchen appliances without scorching, warping, or losing its finish.

Easy to Clean

Thanks to their non-porous structure, Laminam surfaces resist stains, prevent the absorption of liquids, and don’t harbour bacteria, mould, or mildew.

Material Type

Porcelain

Brand

Laminam

Price Band

Band 1

Thickness

12mm, 20mm

Colour

Beige, Cream

Style

Mottle

Surface Finish

Textured

Jumbo Slab Size

3240 x 1620mm

Laminam Bianco

The textural effect that characterises the Oxide Bianco collection is that of metal oxidation, with a colour palette of glacial tones and light shades tending towards light grey. Available with a Natural surface finish, Oxide Bianco reproduces the beauty of ceramics and the metal effect in large 1000×3000 mm slabs, which are particularly suitable for design applications that seek visual continuity and a modern look for the places they furnish.
Laminam 3/3+ and Laminam 5 reduced thicknesses broaden the range of applications: the key word is “ductility”, from the exterior cladding of large surfaces to interior furnishing, the Oxide Bianco ceramic slab is a highly impacting total-look solution.
The R9 anti-slip coefficient completes the proposal and further expands the design possibilities, making Oxide Bianco also ideal for flooring and cladding applications in residential and commercial interiors and exteriors that are particularly exposed to water.
Slabs from the Oxide Bianco collection can also be treated with the Ambience bioactive treatment, the latest generation of Laminam technology based on titanium dioxide, which transforms pollutants (VOC, NOx, SOx) present in the air and water into harmless elements.

A sophisticated blend of natural minerals which produces a worktop of ultimate performance.

Joints
Worktop joints are finished with a small ariss to the top edge. Silicone sealant is applied to prevent water ingression.

Heavily Veined / Particulated Colours
These colours are highly unlikely to have continuous flow of the pattern when 2 sheets or 2 pieces of the same sheet are seamed together. The change of pattern will show up on the seam area

Thermal expansion
Due to thermal expansion Diore Porcelain can expand up to 1mm per metre.

Overhangs and supports
Any overhang extending more than 300mm must be supported.

Upstands
Upstands less than 100mm high are extremely fragile and are not recommended.
Upstands are not normally cut from the same slab as the work surfaces and therefore an exact colour match is not possible.

Your new Porcelain worktops will need care and maintenance to keep them in good order over the years.

If you choose a polished finish they will be more easy to wipe down when compared to natural finishes which hold dirt more due to the surface texture.

This means Natural Finishes take a little longer to clean than Polished but if you use cleaning information in our Cleaning and Maintenance for Ultra Compact Surfaces Guide (link below) you will be able to remove the most stubborn stains.

However Natural Finishes are more resilient to scratching than polished if objects are dragged across the worktops (which should be avoided).

The best advice is to wipe up spillages when they happen and dry the worktop off with a tea towel,

Cleaning and Maintenance for Ultra Compact Surfaces.pdf

Scratches
Porcelains are highly scratch resistant but not scratch proof.

Staining
Porcelain worktops are incredibly hard and non-porous and will not absorb liquids, but it is still possible that grease, wine, coffee, nicotine, fruit juices and other strongly coloured substances can stain the surface if not properly protected or if the spills are not cleaned up immediately.

Hygienic
Polished Porcelain worktops are naturally hygienic as they are non-porous

Handling
For installation of worktops weighing above 120kg, you will need to supply additional labour at no cost to Bluestone, every additional 75kg requires an extra person to assist with lifting.

Key Features

UV Resistant

Laminam Bianco is highly resistant to ultra violet (UV) light and will not fade or degrade over time making it perfect for both indoor and outdoor applications

Durability-Icon

Durable

Porcelain is renowned for its outstanding durability, engineered to withstand the demands of both residential and commercial environments.

Heat Resistant Icon

Heat Resistant

Laminam Bianco offers exceptional heat resistance. The surface can comfortably withstand direct contact with hot pots, pans, and kitchen appliances without scorching, warping, or losing its finish.

Easy to Clean

Thanks to their non-porous structure, Laminam surfaces resist stains, prevent the absorption of liquids, and don’t harbour bacteria, mould, or mildew.

Material Type

Porcelain

Brand

Laminam

Price Band

Band 1

Thickness

12mm, 20mm

Colour

Beige, Cream

Style

Mottle

Surface Finish

Textured

Jumbo Slab Size

3240 x 1620mm

Important Note on Colour and Pattern Variations

Please be aware that images on our website are indicative only. While they provide an idea of the pattern, shading, and colour tones, the actual appearance may differ due to variations in screen settings and the natural characteristics of quartz.

It is recommended that at least a sample be requested, ideally visit our manufacturing hub and view slabs and upon deposit payment you may in person a reserve specific slabs. Note that batch variations between samples and final slab product may differ in both tone and pattern and we provide not guarantee you will have an identical match.

Related Colours