Caesarstone Porcelain Snowdrift

Caesarstone Porcelain Snowdrift

A pristine white surface exuding the elegance of marble, featuring delicate golden-brown veins that drift over a misty, translucent base enhanced by a shadowy effect, all presented in a Honed finish.

Caesarstone Porcelain is a sophisticated blend of natural minerals which produces a worktop of ultimate performance.

Joints
Caesarstone Porcelain worktop joints are finished with a small ariss to the top edge. Sealant is applied to prevent water ingression.

Heavily Veined / Particulated Colours
These colours are highly unlikely to have continuous flow of the pattern when 2 sheets or 2 pieces of the same sheet are seamed together. The change of pattern will show up on the seam area

Thermal expansion
Due to thermal expansion Caesarstone Porcelain can expand up to 1mm per metre.

Overhangs and supports
Any overhang extending more than 300mm must be supported.

Upstands
Upstands less than 100mm high are extremely fragile and are not recommended.
Upstands are not normally cut from the same slab as the work surfaces and therefore an exact colour match is not possible.

Your new Caesarstone worktops will need care and maintenance to keep them in good order over the years.

If you choose a polished finish they will be more easy to wipe down when compared to natural finishes which hold dirt more due to the surface texture.

This means Natural Finishes take a little longer to clean than Polished but if you use cleaning information in our Cleaning and Maintenance for Porcelain Surfaces Guide (link below) you will be able to remove the most stubborn stains.

However Natural Finishes are more resilient to scratching than polished if objects are dragged across the worktops (which should be avoided).

The best advice is to wipe up spillages when they happen and dry the worktop off with a tea towel,

Cleaning and Maintenance for Ultra Compact Surfaces.pdf

Scratches
Ultra Compacts are highly scratch resistant but not scratch proof.

Staining
Porcelain worktops are incredibly hard and non-porous and will not absorb liquids, but it is still possible that grease, wine, coffee, nicotine, fruit juices and other strongly coloured substances can stain the surface if not properly protected or if the spills are not cleaned up immediately.

Hygienic
Polished polished worktops are naturally hygienic as they are non-porous

Handling
For installation of worktops weighing above 120kg, you will need to supply additional labour at no cost to Bluestone, every additional 75kg requires an extra person to assist with lifting.

Key Features

UV Resistant

Caesarstone is highly resistant to ultra violet (UV) light and will not fade or degrade over time making it perfect for both indoor and outdoor applications

Durability-Icon

Durable

Caesarstone is one of the most durable worktops, with over 5 times the flexural strength of granite, and a high level of resistance to external aggressions

Heat Resistant Icon

Heat Resistant

Caesarstone is heat resistant, so no need to worry about those hot pots and pans when you are cooking

Non-Porous

Bacteria and mould have nowhere to take root. When it looks clean, it really is clean

Easy to Clean

With a non-porous surface that prevents dirt and stains from penetrating the material.

Material Type

Porcelain

Brand

Caesarstone Porcelain

Price Band

Band 2

Thickness

12mm, 20mm

Jumbo Slabs Available

Yes

Colour

White

Style

Veined

Surface Finish

Silk, Honed

Caesarstone Porcelain Snowdrift

Caesarstone Porcelain Snowdrift

A pristine white surface exuding the elegance of marble, featuring delicate golden-brown veins that drift over a misty, translucent base enhanced by a shadowy effect, all presented in a Honed finish.

Caesarstone Porcelain is a sophisticated blend of natural minerals which produces a worktop of ultimate performance.

Joints
Caesarstone Porcelain worktop joints are finished with a small ariss to the top edge. Sealant is applied to prevent water ingression.

Heavily Veined / Particulated Colours
These colours are highly unlikely to have continuous flow of the pattern when 2 sheets or 2 pieces of the same sheet are seamed together. The change of pattern will show up on the seam area

Thermal expansion
Due to thermal expansion Caesarstone Porcelain can expand up to 1mm per metre.

Overhangs and supports
Any overhang extending more than 300mm must be supported.

Upstands
Upstands less than 100mm high are extremely fragile and are not recommended.
Upstands are not normally cut from the same slab as the work surfaces and therefore an exact colour match is not possible.

Your new Caesarstone worktops will need care and maintenance to keep them in good order over the years.

If you choose a polished finish they will be more easy to wipe down when compared to natural finishes which hold dirt more due to the surface texture.

This means Natural Finishes take a little longer to clean than Polished but if you use cleaning information in our Cleaning and Maintenance for Porcelain Surfaces Guide (link below) you will be able to remove the most stubborn stains.

However Natural Finishes are more resilient to scratching than polished if objects are dragged across the worktops (which should be avoided).

The best advice is to wipe up spillages when they happen and dry the worktop off with a tea towel,

Cleaning and Maintenance for Ultra Compact Surfaces.pdf

Scratches
Ultra Compacts are highly scratch resistant but not scratch proof.

Staining
Porcelain worktops are incredibly hard and non-porous and will not absorb liquids, but it is still possible that grease, wine, coffee, nicotine, fruit juices and other strongly coloured substances can stain the surface if not properly protected or if the spills are not cleaned up immediately.

Hygienic
Polished polished worktops are naturally hygienic as they are non-porous

Handling
For installation of worktops weighing above 120kg, you will need to supply additional labour at no cost to Bluestone, every additional 75kg requires an extra person to assist with lifting.

Key Features

UV Resistant

Caesarstone is highly resistant to ultra violet (UV) light and will not fade or degrade over time making it perfect for both indoor and outdoor applications

Durability-Icon

Durable

Caesarstone is one of the most durable worktops, with over 5 times the flexural strength of granite, and a high level of resistance to external aggressions

Heat Resistant Icon

Heat Resistant

Caesarstone is heat resistant, so no need to worry about those hot pots and pans when you are cooking

Non-Porous

Bacteria and mould have nowhere to take root. When it looks clean, it really is clean

Easy to Clean

With a non-porous surface that prevents dirt and stains from penetrating the material.

Material Type

Porcelain

Brand

Caesarstone Porcelain

Price Band

Band 2

Thickness

12mm, 20mm

Jumbo Slabs Available

Yes

Colour

White

Style

Veined

Surface Finish

Silk, Honed

Related Colours